• 2s 3s 4s 6s 8s 16s 21s 24s 3A Smart Active Balancer Equalizer for Battery 12V 36V 48V
  • 2s 3s 4s 6s 8s 16s 21s 24s 3A Smart Active Balancer Equalizer for Battery 12V 36V 48V
  • 2s 3s 4s 6s 8s 16s 21s 24s 3A Smart Active Balancer Equalizer for Battery 12V 36V 48V
  • 2s 3s 4s 6s 8s 16s 21s 24s 3A Smart Active Balancer Equalizer for Battery 12V 36V 48V
  • 2s 3s 4s 6s 8s 16s 21s 24s 3A Smart Active Balancer Equalizer for Battery 12V 36V 48V
  • 2s 3s 4s 6s 8s 16s 21s 24s 3A Smart Active Balancer Equalizer for Battery 12V 36V 48V

2s 3s 4s 6s 8s 16s 21s 24s 3A Smart Active Balancer Equalizer for Battery 12V 36V 48V

Transport Package: Carton
Specification: 2-24S
Trademark: lsbatti
Origin: China
Samples:
US$ 220/Piece 1 Piece(Min.Order)
| Request Sample
Customization:
Manufacturer/Factory
Gold Member Since 2017

Suppliers with verified business licenses

Guangdong, China

Basic Info.

HS Code
9032899099

Product Description

lithium battery maintanenance with balanced machine for 1-24S lifepo4 lithium ion battery pack


Product introduction:
1. Support 2~24S lithium batteries (li-ion,Lifepo4,LTO, battery voltage between 2V~4.5V).
2. Uniform voltage is automatically identified as the lowest voltage of the battery series.
3.Automatic identification series of the battery pack.
4. Reverse connection, overvoltage 4.5V, low voltage protection (2V) alarm.
5. After balancing is completed, the system automatically stops and generates an alarm.
6.Equalizer belongs to constant resistance discharge mode, constant resistance value 1 ohm (LI-ION max current up to 4A, lifepo4 max current up to 3A).
7.Display content (each series of voltage, total voltage, average voltage, maximum voltage, minimum voltage, maximum differential pressure, balanced voltage,Number of battery series).
8. Easy operation, simple and easy to use.
9. Good effect and fast speed.
10.Single series input interface voltage (-100V~+100V).
11. External power supply 12V5A.

2s 3s 4s 6s 8s 16s 21s 24s 3A Smart Active Balancer Equalizer for Battery 12V 36V 48V2s 3s 4s 6s 8s 16s 21s 24s 3A Smart Active Balancer Equalizer for Battery 12V 36V 48V

Using steps:
1. Power on and start the equipment.
2. Connect the battery pack according to the wires marked on the equalizer or terminal board.
3. Check whether the voltage and series numbers displayed on the display screen are normal. If not, check the wiring or battery.
4. Start balancing, check whether the balancing voltage is normal, and stop automatically after balancing.
Battery Maintenance Procedure:
There is bad cell: replace the cell - fully charged- balance- fully charged- complete the maintenance of the battery.
There is no bad cell: fully charged- balance- fully charged- complete the maintenance of the battery.
if the effect can not be achieved, it can be repeated many times.

Attention:
1. Due to the large equalizing current, the balancing wires should be thick enough; otherwise, thewires will be burned or other problems will occur.
2. B- is the negative of the battery pack. B1 is the first series from the negative .
When it is balancing, please be sure inject rot free channel line do not touch the battery, otherwise it may damage the machine



2s 3s 4s 6s 8s 16s 21s 24s 3A Smart Active Balancer Equalizer for Battery 12V 36V 48V

2s 3s 4s 6s 8s 16s 21s 24s 3A Smart Active Balancer Equalizer for Battery 12V 36V 48V2s 3s 4s 6s 8s 16s 21s 24s 3A Smart Active Balancer Equalizer for Battery 12V 36V 48V
 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

You Might Also Like

Gold Member Since 2017

Suppliers with verified business licenses

Manufacturer/Factory
Registered Capital
5000000 RMB
Plant Area
>2000 square meters